Tool Detail
Vintage Eggbeater Hand Drill by G.M.C.O.
Restored Hand Crank Drill with Wood Handle

Restored G.M.C.O. eggbeater hand drill with a hand crank, turned wooden grips, and a knurled three-jaw chuck. The exposed metal drive wheel carries a clear Long Island City, New York maker’s mark. Approximately 12 inches long, with a printed care sheet included.
Tool Details
This vintage hand drill has an exposed geared drive, a wooden main handle and side grip, and a rounded wooden crank knob. The wheel is marked “G.M.CO. MFG. INC.” and “L.I. CITY. N.Y.” The exact model and production date are unverified.
Condition
The metal retains scratches, dark oxidation spots, and surface wear. The main wooden handle has visible lengthwise checks and small marks from use. The close-up photos show the handle, chuck jaws, and gear teeth.
Restoration
I completely disassembled the drill, cleaned out the accumulated grease, then oiled, waxed, and reassembled it using the existing wooden grips.
Ideal Use
An eggbeater-style drill gives you direct control over speed when starting small pilot holes by hand. The exposed gear and legible maker’s mark also make this a good piece for a vintage tool collection or workshop display.
Highlights
- Hand-cranked eggbeater drive
- G.M.C.O. maker’s mark from Long Island City, New York
- Approximately 12 inches long
- Knurled three-jaw chuck
- Wooden main grip, side grip, and crank knob
- Fully disassembled, cleaned, oiled, and waxed
- Printed care sheet included